ABUS AZBW10000 motion detector Passive infrared (PIR) sensor Wired Wall White

PIR detector: Unobtrusive, effective, power-saving: The wire motion detector is equipped with a passive infrared sensor (PIR). It detects human-induced heat movements in its detection field and reports any event to the alarm control panel. Optional PET Immunity: For your beloved pet. Optional "pet-immune" function, individually adjustable to 3 levels: distinguishes between humans and animals: Moving persons are reliably detected while pets weighing up to 15 kg are ignored. In rare individual cases, however, a lighter animal can also trigger the detector, e.g. if it moves close to the detector, jumps or flies. The ability to optionally configure animal immunity on the detector reduces complexity in planning, installation, and inventory management. Technology and installation: Optimal mounting location is in a corner, about 1.80 to 2.40 meters above the floor. The expected direction of travel of an intruder should be across the detector. The viewing angle is approximately 90 degrees, and the detection range (depending on the mounting height) is up to 18 x 18 meters. Thanks to the new spherical lens design, the detector detects even more reliably and offers significantly more uniform coverage. Thanks to integrated anti-creep protection, the detector has no blind spot and also detects persons directly below its mounting position. Use the jumper to set the sensitivity of the detector. With its integrated, common resistor combinations, which are configured by means of jumpers, the wiring to the alarm control panel is flexible and quick.

Weight & dimensions

• Width: 65.4 mm
• Depth: 45.5 mm
• Height: 86.8 mm
• Weight: 80 g

Power

• Power source type: DC
• Power consumption: 11 mA
• Input voltage: 24 V
• Power consumption (typical): 0.081 W

Packaging data

• Quantity per pack: 1 pc(s)

Security

• Sensor type: Passive infrared (PIR) sensor
• Connectivity technology: Wired
• Detection distance: 15 m
• Pet immunity (max): 15 kg
• Tamper protection: Y

Features

• Mounting type: Wall
• Placement: Indoor
• Product colour: White
• Installation height (min): 1.8 m
• Installation height (max): 2.4 m
• Housing material: Acrylonitrile butadiene styrene (ABS)
• Placement supported: Indoor

Condition: new. When shipped to GB or ROI, all our electronic articles come with a BSI-proven power adaptor fitted by our company. For free! (As long the device comes with a power cable.)